• Note: the appearance of marks/stains on the
interior base of the pressure cooker does not
alter the quality of the metal. It is merely due
to calcium deposits. To remove these, use a
scouring pad and some diluted white vinegar.
Use
Before cooking
• Before each use, check that the control module
is correctly fastened (retaining nut is tightened);
you can use a coin if necessary.
• Before each use, check that the operating valve
(selector at position or * or ) ) and
the safety valve inside the lid can move freely
- Fig 13
• Close the lid.
• Set the programme selector to the position
indicated in your recipe.
• Set the timer for the required cooking time.*
• Put the pressure cooker on the heat source at
the highest temperature.
• It is perfectly normal to see steam being
released through the pressure indicator outlet
before the pressure starts to increase. Water
droplets may appear in the area around the
pressure indicator.
• As soon as the pressure indicator comes up ,
you will no longer be able to open your pressure
cooker.
To Next Page
Loading...
Need help?
General
