Compatible heat sources
•
Stainless steel models are suitable for all hob
types, including induction.
•
On electrical and induction stoves, use a hot plate
or hob or ring size of diameter of equal or lower
than the base of the pressure cooker.
•
On a ceramic hob, make sure that the base of the
pot is clean and dry.
•
On a gas hob, the flame should not lick out from
around the base of the pressure cooker.
•
On all sources of heat, make sure that your pressure
cooker is correctly centred.
• Not suitable for use on an Aga
TEFAL spare parts
• Commercially available accessories are:
•
To replace other parts or for repairs, contact an
TEFAL Approved Service Centre
• Use only TEFAL original parts suitable for your
model.
To Next Page
Loading...
Need help?
General
