TEHMA PP700-E - Product Identification and Compliance Documents; Warranty Terms and Conditions; Manufacturer and Authorized Representative

25
WARRANTY
• All parts produced by TEHMA are guaranteed for a period of twelve months from the date of delivery to the
final customer, against defect of: material, workmanship-assembly. Cost of labour and transports are not covered
by warranty and should be paid by the customer. Parts and complete components not produced by TEHMA
such as engines, compressors, alternators, etc., are covered by the warranty of the manufacturer.
• Batteries of power packs and “worn out “ accessories, such as tool bits, drill bits, cut off discs, flexible hoses,
quick couplers, or other accessories that have not an identification number, are covered by a warranty of three
months from the date of delivery to the final customer.
• TEHMA reserves the right to substitute only those parts recognized to be defective after an inspection of
TEHMA engineers under warranty at its own expenses and in its own plant. If the repairs during the warranty
period are performed by the customers, TEHMA will reject any charge for labour expenses.
The warranty will be automatically voided if:
• Repairs are performed using non original, adapted or modified parts.
• The maximum hydraulic values of pressure, back pressure and flow are exceeded, or the filtration and other
operative conditions of the hydraulic circuits are inadequate to power TEHMA tools.
• If the tool has been modified or used in excessive heavy applications or different from its natural applications.
• If the attached WARRANTY CARD is not properly filled and mailed to TEHMA.
In any case the warranty excludes any redraft or reimbursement for damages of any kind and there are not other
explicit or implicit warranties besides the above mentioned one.
For additional information please read carefully the document "Warranty and general sales
conditions" attached to this manual in a separate booklet.
FOR ANY CONTROVERSY, THE COMPETENT COURT IS IN LUGANO-SWITZERLAND.
Manufacturer and European authorised representative (E.A.R.)
Manufacturer: European authorized representative
(E.A.R.):
TEHMA SA Virgilio Tentori Srl
Vicolo Concordia 1, 6932 Via Belfiore 31/D, 23900
Lugano -
Breganzona, Switzerland Lecco, Italy