Teikoku USA | Chempump Instruction Manual HE-10677-P (1018)2
Contents
Introduction 2
Overview 2
1. General Information 3
2. Installation 5
3. Operation 8
4. Maintenance 11
Appendix 16
A. Quick Start Guide ......................................................17
B. Reverse Circulation (4N-7653) .....................................18
C. Troubleshooting .........................................................19
D. Sectional View (6A-8901) ..........................................20
E. TRC-1 Information Sheet .............................................21
F. Decontamination Form ...............................................22
Figures
Figure 1-1. Reverse Circulation Type-R (Plan 13-SE) ...................3
Figure 2-1. Teikoku Type-R (Plan 13-SE) TRG ..............................7
Figure 2-2. Teikoku Type-R (Plan 13-SE) 460 Volt, 3-Phase ..........7
Figure 3-1. Teikoku TRC Rotation Indicator ................................9
Figure 4-3. Bearing Wear Limits ...............................................13
Figure 4-4. “g” Gap ................................................................13
Figure 4-1. Front Bearing – Only Spiral Grooves ......................13
Figure 4-2. Rear Bearing – Spiral and Straight Grooves ............13
Figure 4-5. Type-R (Plan 13-SE) Model Number Indentification
Code Example .......................................................14
Tables
Table 2-1. Conditions indicated on the TRG Meter .....................6
Table 4-1. Bearing Wear Limit ..................................................14
Table 4-2. Adjusting Value of Gap “g” ....................................14
Table 4-3. End Play ..................................................................14
Table 4-4. Tightening Torques ..................................................14
Table 4-5. Torque Values for Motor Terminal Connections –
Terminal Box and Connection Stud Size ...................14
Table 4-6. Motor Frame and Terminal Box Size .........................14
Table 4-7. Pump Ring Clearance (Standard Horizontal Pump) ...15
Overview
Teikoku Type-R (Plan 13-SE) sealless canned motor pumps are
designed for the industrial refrigeration market and offer an
advanced low probability, true secondary containment, envi-
ronmentally friendly alternative to sealed pumps and single
containment sealless pumps.
Care should be exercised upon installation, start up, removal and
maintenance of the pumps. Recommended safety equipment
should be used at all times.
This manual, containing basic instructions for installation, op-
eration and maintenance of the Teikoku Type-R (Plan 13-SE), is
designed to assist you in obtaining this service. It is important
that the persons responsible for the installation, operation, and
maintenance of the pump read and understand this manual
thoroughly.
The Teikoku Type-R (Plan 13-SE) pump is supplied with the
Teikoku Rotary Guardian (TRG
TM
), the radial monitoring system
of the rotating assembly of a Teikoku canned motor pump. The
TRG monitors bearing wear and gives a direct readout as to bear-
ing condition. The TRG is mounted on the electrical junction box
as standard.
To Next Page
Loading...
