Copyright © Teison Energy Technology Co.,Ltd. All Rights Reserved. 19 | P a g e
Configure your Local Device:
Pin Query
After configuring your network and connecting to the internet, the charger's plug
and play feature remains inactive. This means that no one can access or use
the charger unless they are logged in with the same account used to configure
your Teison Charger online. However, if you wish to share your Teison charger
with someone else without giving them access to your app account, you can
use the PIN code feature.
Here's how you can do it:
1. Ask the new user to download and create an account for MyTeison app.
2. Request them to turn on Bluetooth on their phone.
3. Once your TEISON EV Charger appears on their local devices list, they can
immediately click on "Use".
4. They will receive a prompt requesting the PIN number.
5. Share this number with them.
6. After the new user finishes using your Teison charger, remember to update
the PIN number if you don't want them to use it again.
To set up a PIN code for your charger, follow these steps:
To Next Page
Loading...