Copyright © Teison Energy Technology Co.,Ltd. All Rights Reserved. 32 | P a g e
Plug and play:
The TEISON EV Charger comes with a convenient feature that allows you to
choose its status. When the charger is off, it will remain locked, and you will not
be able to start a charging session unless you have access to the myTeison app
or the RFID card.
Once the charger is activated, your EV should start charging automatically once
you plug it in. You will not need to press start on your app or use the RFID card.
The EV will keep charging until one of the following occurs:
- It reaches 100% and the battery is full
- It reaches the SOC that has been set by your EV
- You stop the charging from your EV
- You stop the charger using your myTeison app
- You stop the charging by using the RFID card.
Note: you can’t activate the Plug and play if you have a charging reservation
active.
To Next Page
Loading...