Copyright © Teison Energy Technology Co.,Ltd. All Rights Reserved. 4 | P a g e
- Before using the charger, make sure to have a qualified electrician check the
electrical infrastructure for suitability and compliance with charger
specifications.
- Properly ground the unit before turning it on to avoid accidents.
- Always conduct a visual inspection for damage before charging. Ensure that
the contact area of the charging plug is free from dirt and moisture, the
charging cable is free of cuts or abrasions, and the cable outlet of the charger is
firmly seated.
- Unauthorized modifications, changes, or repairs of the charger are strictly
prohibited and will result in immediate exclusion from the warranty.
- Do not use the charger near volatile gases or flammable objects.
- Keep children away from the TEISON EV Charger as it is not meant for their
use.
- Disconnect the charger only by the plug and not the cable. Do not disconnect
the charger during charging.
- Only remove the charging label by the plug and not the cable of the power
outlet.
- Change the accessory adapters only when the power supply is disconnected.
- Stop using the TEISON EV Charger immediately if charging failure or
abnormality occurs.
- Do not use the equipment in thunder and lightning weather. Protect it from
moisture, rain, sunlight, and corrosive environments. Do not submerge the AC
charging device in water.
Remember, this product is only used for charging electric vehicles and should
not be used for any other purposes.
To Next Page
Loading...