10. List of spare parts
Below, you will find a list of the various filter cartridges that can be installed in units of this type.
We recommend that you order the filter cartridges that were supplied on initial delivery of the unit.
Otherwise, the cleaning performance or lifetime of the filter cartridges may be impaired (due to
differences in the filter material or filter surface area). If you have any doubts about which filter
cartridges are needed for your unit type or your application, please contact our sales team and
specify the machine number.
Filter cartridge, Type “BIA-M”, 7,8m² (Ø327 x 600 mm)
(4 pieces of these filter elements are required for the device)
Filter cartridge, Type “BIA-M”, 10,0m² (Ø327 x 600 mm)
(4 pieces of these filter elements are required for the device)
Filter cartridge, Type “easy clean plus” 12,5m² (Ø327 x 600 mm)
(4 pieces of these filter elements are required for the device)
Filter cartridge, Type “BIA-M”, 15,6m² (Ø327 x 1200 mm)
(4 pieces of these filter elements are required for the device)
Filter cartridge, Type “BIA-M”, 20,0m² (Ø327 x 1200 mm)
(4 pieces of these filter elements are required for the device)
Filter cartridge, Type “easy clean plus”, 25,3m² (Ø327 x 1200 mm)
(4 pieces of these filter elements are required for the device)
Filter mats for control cabinet
209 x 209 mm (6 pieces)
165 x 165 mm (6 pieces)
114 x 114 mm (6 pieces)
100320008
100320007
100320009
PE-bag for the disposal of filter cartridges (4 pieces)
PE-bag for inserting into the dust collecting tank (10 pieces)
Precoat for filter cartridges, 400g (in a bucket)
Precoat für filter cartridges, 100g (in a bucket)
Seal for displacer (Ø30 mm / 1 piece)
Particle sensor (detector head)
BA_FilterCube_4_IFA_20230808_EN
To Next Page
Loading...
