© 2007 D 161 - 08/07 16 of 36
Item Field Range
Access
Description
NONE, Mbr1, Mbr2,
Mbr3, Mbr4, UnOc
Default = NONE
InST
ADV
HEAT SCHEDULE SECTION G
Selects the schedule used by the setpoint control.
If a schedule is not required, select NONE.
If the schedule is set on another thermostat or setpoint
control, select Mbr1 to Mbr4.
UnOc is not available in Mode 3.
Note: This item can be viewed in the USEr and InST
(Installer) access levels but can only be adjusted in the
ADV (Advanced) access level.
SCHEDULE MENU
SCHD (Schedule) Menu (1 of 1)
The SCHEDULE menu allows the setpoint control to
follow a schedule.
After the last item, the control returns to the first item in the menu.
To Next Page
Loading...
Need help?
General
