15 of 32 © 2007 D 161 - 08/07
SCENE MENU
SCENE Menu (1 of 1)
The SCENE Menu items set the current scene as well
as the scene settings.
Item Field Range
Access
Description
OFF, 0:05 to
24:00 hr, On
(in 5 min. increments)
Default = 1:00
LTD
USEr
InST
ADV
RUN TIME OCCUPIED SECTION B, D, E
Select the amount time for the setpoint control to operate at
the occupied temperature when a Setpoint Device Enable
is provided.
Note: This item is only available in Application Mode 2
(Hot Tub) or 4 (Floor) if a programmable setback schedule
is selected.
Note: This item is only available in Application Mode 1
if a programmable setback schedule is selected and the
Setpoint Device Enable setting in the ADJUST menu is set
from 1 through 12.
OFF, On
Default = OFF
InST
ADV
SCENE MENU SECTION H
Select whether or not to use the scene feature on the
setpoint control.
After the last item, the control returns to the first item in the menu.
To Next Page
Loading...
Need help?
General
