© 2007 D 161 - 08/07 18 of 36
MISC (Miscellaneous) Menu (2 of 2)
Item Field Range
Access
Description
– – –, 1 to 24 ADV
NUMBER OF DEVICES
SECTION L
Number of tN4 devices connected to this tN4 bus.
Note:
This item is only available when the setpoint control
has tN4 communication.
bus#:01 to bus#:24,
AUTO
Default = AUTO
SEC
LTD
USEr
InST
ADV
ADDRESS SECTION L
The tN4 bus address of this setpoint control.
Auto allows the tN4 system to automatically assign an address
to the setpoint control.
To manually set the address, use the Up or Down buttons while
in the ADV (Advanced) or InST (Installer) access level.
Note:
This item is only available when the setpoint control
has tN4 communication.
InST
ADV
RESTORE DEFAULTS
Press the Up and Down buttons together to load the factory
defaults. The SELECT icon appears and then the display shows
DONE when the factory defaults have been completed.
161, Software
Version
SEC
LTD
USEr
InST
ADV
TYPE
Product number of this setpoint control. Hold the Up button
to view the software version.
After the last item, the control returns to the first item in the menu.
MISC MENU
To Next Page
Loading...
Need help?
General
