Need help?Do you have a question about the Tekron NTS 01 and is the answer not in the manual?
Lists all items included in the NTS 01 kit shipment.
Describes how to mount the NTS01 unit in a 19" rack or on a bench.
Provides instructions for optimal placement and grounding of the GPS antenna.
Details the function and connectivity of rear panel ports like P1-P6 and the antenna input.
Explains the LCD display, start-up screen, operating default, and local time options.
Details the three-character status field indicating GPS receiver performance.
Describes the function of the GPS and SYN LEDs for status indication.
Introduces the NTS ports, their IP addressing, and protocols.
Introduces the proprietary software for setting system parameters.
Step-by-step guide for installing the NTS01 configuration utility on a PC.
Explains parameters like Antenna Cable Delay, Mask Angle, Test Mode, and Sync to IRIG-B.
Details time display settings, city selection for time zones, and daylight saving rules.
Configures fundamental network address parameters like IP Address and Netmask.
Sets NTS parameters like Broadcast Mode, Encryption, and Visible Satellites.
Configures SNMP settings, resets to factory defaults, and save/exit options.
Shows GPS Sky Chart, signal strength, current position, and UTC time.
Explains how the NTS obtains an IP address automatically via DHCP.
Describes how to assign an IP address using ARP on UNIX and Windows.
Details the NTS01E unit for additional Time Server Ports.
Describes different power supply configurations available for the unit.
Explains the firmware option for local time display and output.
Details the optional kit for protecting the unit from lightning strikes.
Provides detailed electrical and physical characteristics of the antenna cable.
To Next Page
General