Save and Recall Informat ion
12. If desired, push the down arrow key to move
the character cursor down a ro w to the Server
IP Address: field.
OK Accept
13. Turn multipurpose knob a and push Select or
Enter Character as often as needed to enter
the name.
14. When done, push OK Accept.
NOTE. If you have multiple printers connected to
the oscilloscope at the same time, the oscilloscope
will print to the printe r listed in the Utility> U tility
Page> Print Setup> Select Printer menu item.
DPO3000 Series Oscilloscopes User Manua l 221
To Next Page
Loading...
Need help?
General
