EasyManua.ls Logo

Tektronix DPO5104B

Tektronix DPO5104B
920 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TekProbe component Description
P5200 High-voltage differential probe
P5205 High-voltage differential probe
P5210 High-voltage differential probe
P6015A High-voltage probe
P6139A Passive probe
P6701B Converter, optical-to-electrical (multimode)
P6703B Converter, optical-electrical (single-mode)
TCP202A Current probe
TCP300, TCP400 Series Current measurement system (Requires TCPA300/TCPA400 amplifiers)
Options
The following options are available for your instrument.
DPO5000B, MSO5000B:
Software:
Opt. BRR - BroadR-Reach Compliance Testing
Opt. DDRA - DDR Memory Bus Analysis; Available, only on 1 GHz and 2 GHz models (requires DJA)
Opt. DJA - Jitter And Eye Analysis Tools - Advanced (DPOJET)
Opt. ET3 - Ethernet Compliance Testing
Opt. HSIC - USB HSIC protocol decode and electrical validation (Available on 2 GHz models only.) (requires DJA)
Opt. MOST – MOST Essentials – Electrical Compliance and Debug Test Solution for MOST50 and MOST150
Opt. MSOE - 16-channel MSO
1
Opt. MTM - Mask Testing for Serial Communication Standards (up to 1.5 Gb/s)
Opt. PS2 - Power Solution Bundle: DPOPWR, THDP0200, TCP0030A, 067-1686-XX (Deskew Fixture)
Opt. PS3 - Power Solution Bundle: DPOPWR, TMDP0200, TCP0020, 067-1686-XX (Deskew Fixture)
Opt. PWR - Power Measurement and Analysis
Opt. SR-AERO - MIL-STD-1553 Serial Triggering and Analysis
Opt. SR-AUTO - Automotive Serial Triggering and Analysis (CAN, LIN, FLEXRAY)
Opt. SR-COMP - Computer Serial Triggering and Analysis (RS-232/422/485/UART)
Opt. SR-CUST - Custom Serial Analysis Kit for Developers
Opt. SR-DPHY - MIPI-D-PHY (DSI1/CSI2) Serial Analysis
Opt. SR-EMBD - Embedded Serial Triggering and Analysis (I2C, SPI)
Opt. SR-ENET - Ethernet Serial Triggering and Analysis (10BASE-T and 100BASE-TX)
Opt. SR-USB - USB Serial Triggering and Analysis (LS, FS, HS)
Opt. SVE - SignalVu Essentials - Vector Signal Analysis Software
1
Available for DPO5000B Series. Enabling/disabling this key does not change the model number
About Tektronix oscilloscopes
10 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Table of Contents

Other manuals for Tektronix DPO5104B

Related product manuals