EasyManuals Logo

Tektronix MDO34 Declassification And Security Instructions

Tektronix MDO34
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Type of user information
stored
None
Method of modification Indirectly
Data input method Not applicable
Location IO board
User accessible Not applicable
To clear Not applicable, no user data
Process to sanitize Not applicable, no user data
EEPROM
Type and size EEPROM 1 Kbit
Function Application module firmware
Type of user information
stored
None
Method of modification Not applicable
Data input method Not applicable
Location MDO3000 application modules
User accessible Not applicable
To clear Not applicable, no user data
Process to sanitize Not applicable, no user data
Media and data export devices
Three USB host ports Supports removable USB flash drive
Function User storage of reference waveforms, screen images, and instrument setups
Method of modification Directly
Data input method User writeable
Location Two USB host port on the front of the instrument
One USB host port on the rear of the instrument
Files can be deleted or over-written on the oscilloscope or on a PC. USB flash drive can be
removed or destroyed.
User accessible Yes
Process to disable The USB host port cannot be disabled with 3 Series MDO instruments without the 3-SEC option.
If your instrument has the 3-SEC option, perform the procedure Use the 3-SEC option to disable all
I/O ports on page 7 to disable the two USB host ports.
USB device port
Function Supports remote control and data transfer to a PC.
Method of modification Directly
Data input method Remote control via USBTMC
Location USB device port on rear of the instrument
Memory devices
4 3 Series MDO Declassification and Security Instructions

Other manuals for Tektronix MDO34

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix MDO34 and is the answer not in the manual?

Tektronix MDO34 Specifications

General IconGeneral
Analog Channels4
Sample Rate2.5 GS/s
Record Length10 Mpoints
Mixed Domain AnalysisYes
Waveform Capture Rate>280, 000 wfms/s
Spectrum Analyzer Frequency Range9 kHz to 3 GHz
Vertical Resolution8 bits
Input CouplingAC, DC, GND
Operating Temperature0°C to +50°C
Digital Channels16
ConnectivityUSB, LAN, HDMI
Arbitrary Function Generator50 MHz
Trigger TypesEdge, Pulse Width, Runt, Logic, Setup/Hold, Rise/Fall Time, Video
Input Impedance1 MΩ
Maximum Input Voltage300 Vrms
Dimensions140 mm
Weight4.5 kg
Bandwidth100 MHz, 200 MHz, 350 MHz, 500 MHz
Display10.1-inch capacitive touch HD display
Voltmeter4-digit

Related product manuals