Tektronix MSO2000 series User Manual

Acquire the Signal
Acquire the Signal
This se ction describes concepts o f and procedures for setting up the oscilloscope to acquire the signal as you want it to.
Setting Up Analog Channels
Use fron t-panel buttons and knobs to set up your instrument to acquire signals using the analog channels.
1. Connect the P6139A or VPI probe to the
input signal source.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 81

Tektronix MSO2000 series Specifications

General

Brand	Tektronix
Model	MSO2000 series
Category	Test Equipment
Language	English