Tektronix MSO2000 series User Manual

Installation
4. Power on the oscilloscope. The instrument
automatically recognizes the replacement
firmware and installs it.
If the instrumen t does not install the firmware,
rerun the procedure. If the problem continues,
try a different model of USB flash drive. Finally,
if needed, contact quali fied service personnel.
NOTE. Do not power off the oscilloscope or
remove the USB flash drive until the oscilloscope
finishes installing the fi rmware.
MSO4000 and DPO4000 Series Oscilloscopes User Manual 39

Tektronix MSO2000 series Specifications

General

Brand	Tektronix
Model	MSO2000 series
Category	Test Equipment
Language	English