Tektronix MSO2000 series User Manual

Installation
2. Connect the oscilloscope to your computer
with the appropr iate USB or Ethernet cable.
To communicate between the oscilloscope and
a GPIB system, connect the oscilloscope to
the TEK-USB-488 GPIB-to-USB Adapter with
a USB cable. Then connect the adapter to
your GPIB system with a GPIB cable. Cycle
the power on the oscillosco pe.
44 MSO4000 and DPO4000 S eries Oscilloscopes User Manual

Tektronix MSO2000 series Specifications

General

Brand	Tektronix
Model	MSO2000 series
Category	Test Equipment
Language	English