Tektronix MSO5034B Printable Help

Behavior. Edge triggering is the most common way to trigger an instrument. The trigger occurs when the trigger source passes
through a specific level on the specified slope (rising or falling).
What do you want to do next?
Learn more about other trigger types.
Return to the Trigger Setup control window.
Trigger slope
The trigger slope determines whether the instrument finds the trigger point on the rising edge, falling edge, or both edges of the
signal.
Set up a Freq/Period trigger
From the Trig menu, select Freq/Per Setup.
Overview. Use the controls in this window to set up the frequency or period trigger parameters.
Trigger setups
DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series 415

Tektronix MSO5034B Specifications

General

Brand	Tektronix
Model	MSO5034B
Category	Test Equipment
Language	English