Tektronix MSO54 Printable Help

5. Tap outside of the Bus configuration menu to close it.
6. To get a stable triggered waveform, double-tap the Trigger badge, set the Trigger Type to Bus, select the bus Source to the
parallel bus you just set up, and enter the data condition on which to trigger in the Data field.
7. For information on parallel bus menu settings, tap the Help button on the Bus configuration menu.
Acquiring digital signals
116 MSO54, MSO56, MSO58, MSO58LP, MSO64 Help

Tektronix MSO54 Specifications

General

Brand	Tektronix
Model	MSO54
Category	Test Equipment
Language	English