Demo 11: ISM band DPX (Demo board not needed)
The real time streaming of the RSA306 combined with the DPX processing of the SignalVu-PC software is designed
to address the measurement challenges associated with dynamic RF signals such as the bursted packet
transmissions of WLAN and Bluetooth. Combo devices that use both Bluetooth and 802.11b/g/n WLAN networks
have a unique set of RF interference problems because they share the same 2.4 GHz Industrial/Scientific/Medical
(ISM) frequency band. In this example, we will explore this real-world problem using a whip antenna. The
demonstration relies on WLAN and Bluetooth signals from a tablet, phone or PC that you can control On or Off.
Instructions for the antenna
1. Keep the whip antenna attached to
the RF input on the demo board as in
the last example.
To Next Page
Loading...
