Tektronix TDS 500C Programmer's Manual

Command Descriptions
2–86
TDS Family Oscilloscope Programmer Manual
CURSor:PAIred:HDELTA?
CURSor
:
PAIred :
?
HDELTA
CURSOR:PAIRED:HDELTA?
might return 5.08E+0 for the voltage difference between the two cursors.
CURSor:PAIred:HPOS1 (Query Only)
Queries the horizontal bar (voltage) position of the first paired cursor.
Cursor
CURSor:FUNCtion
CURSor:PAIred:HPOS1?
CURSor
:
PAIred :
?
HPOS1
CURSOR:PAIRED:HPOS1?
might return -64.0E-3, indicating that the first cursor is at –64.0 mV.
CURSor:PAIred:HPOS2 (Query Only)
Queries the horizontal bar (voltage) position of the second paired cursor.
Cursor
CURSor:FUNCtion
CURSor:PAIred:HPOS2?
CURSor
:
PAIred :
?
HPOS2
CURSOR:PAIRED:HPOS2?
might return -64.0E-3, indicating the second cursor is at –64.0 mV.
Syntax
Examples
Group
Related Commands
Syntax
Examples
Group
Related Commands
Syntax
Examples

Tektronix TDS 500C Specifications

General

Brand	Tektronix
Model	TDS 500C
Category	Test Equipment
Language	English