Nominal Traits
TDS 500C, TDS 600B & TDS 700C Performance Verification and Specifications
2–13
Table 2–5: Nominal traits — Triggering system (cont.)
Name Description
Communication Trigger Modes of
Operation
(Option 2C Comm Trigger)
Standard Name Code
1
Bit Rate
OC1/STM0 NRZ 51.84 Mb/s
OC3/STM1 NRZ 155.52 Mb/s
OC12/STM4 NRZ 622.08 Mb/s
DS0 Sgl Masks
2
64 kb/s
DS0 Dbl Masks
2
64 kb/s
DS0 Data Contra Masks
2
64 kb/s
DS0 Timing Masks
2
64 kb/s
E1 AMI 2.048 Mb/s
E2 AMI 8.44 Mb/s
E3 AMI 34.368 Mb/s
E4 CMI 139.26 Mb/s
E5 (CEPT) NRZ 565 Mb/s
STM1E CMI 155.52 Mb/s
DS1 AMI 1.544 Mb/s
DS1A AMI 2.048 Mb/s
DS1C AMI 3.152 Mb/s
DS2 AMI 6.312 Mb/s
DS3 AMI 44.736 Mb/s
DS4NA CMI 139.26 Mb/s
STS-1 AMI 51.84 Mb/s
STS-3 CMI 155.52 Mb/s
FC133 NRZ 132.8 Mb/s
FC266 NRZ 265.6 Mb/s
FC531 NRZ 531.2 Mb/s
FC1063 NRZ 1.0625 Mb/s
D2 NRZ 143.18 Mb/s
D1 NRZ 270 Mb/s
FDDI NRZ 125 Mb/s
1
AMI = Alternate Mark Inversion. CMI = Code Mark Inversion. NRZ = Non-return to Zero.
2
These Telecom DS0 standards are automatically selected from the Mask Menu. The trigger uses Pulse/Width trigger.
Table 2–6: Nominal traits — Display system
Name Description
Video Display 7 inch diagonal, with a display area of 5.04 inches horizontally by 3.78 inches vertically
TDS 520C, 540C, 620B, and 680B: Monochrome display
TDS 644B, 684B, 724C, 754C, and 784C: Color display
Video Display Resolution 640 pixels horizontally by 480 pixels vertically
To Next Page
Loading...
Need help?
General
