Command Descriptions
2–224
TDS Family Oscilloscope Programmer Manual
might return , indicating that the delayed trigger occurs on the rising edge.
TRIGger:DELay:EDGE:SOUrce
Selects the source for the delayed trigger. This command is equivalent to
selecting Source in the Delayed Trig menu.
Trigger
" # " (not available on TDS 520A &
524A) $ ! %
"
"
"
!
" specifies an external trigger using the Auxiliary Trigger Input
connector that is located on the rear panel of the instrument. The TDS 520A &
524A do not have an Auxiliary Trigger input and so do not support this
argument.
! specifies one of the input channels.
selects channel 1 as the input source for the delayed trigger.
TRIGger:DELay:EVENTS? (Query Only)
Returns the current delayed trigger event parameter.
Trigger
"
Examples
Group
Syntax
Arguments
Examples
Group
Syntax
To Next Page
Loading...
Need help?
General
