Acquiring and Displaying Waveforms
3–50
TDS 500D, TDS 600B, & TDS 700D User Manual
To define math waveform colors:
1. Choose to define math waveform colors by selecting the main menu Map
Math item.
2. Select one of the three math waveforms by pressing Math in the side menu.
3. If you want to assign the selected math waveform to a specific color, press
Color and cycle through the choices.
4. If you want the selected math waveform to be the same color as the
waveform it is based on, select Color Matches Contents. If the math
waveform is based on dual waveforms, the math waveform will use the color
of the first constituent waveform.
To return to the factory defaults, select Reset to Factory Color.
To define reference waveform colors:
1. Press Map Reference in the main menu. (See Figure 3–23.)
2. Select one of the four reference waveforms by pressing Ref in the side menu.
3. To assign the selected reference waveform to a specific color, press
(repeatedly) Color and choose the value.
4. To make the selected reference waveform the same color as the waveform it
is based on, select Color Matches Contents.
To return to the factory defaults, select Reset to Factory Color.
Set Math Waveform Color
Set Reference Waveform
Color
To Next Page
Loading...
Need help?
General
