Tektronix TDS1002 Manual

TDS1000 and TDS2000 Series Digital Storage Oscilloscopes Service Manual
7-- 1
Diagrams
This section describes the electrical operation of the TDS1000- and TDS2000-
series oscilloscopes using the major circuit blocks or modules. Figure 7--1 shows
the oscilloscope module interconnections.
The shaded area in Figure 7--1 represents modules and circuits used only in
four-channel oscilloscopes.

Tektronix TDS1002 Specifications

General

Bandwidth	60 MHz
Channels	2
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Sensitivity	2 mV/div to 5 V/div
Vertical Resolution	8 bits
Display Resolution	320 x 240 pixels
Display	5.7 inch monochrome LCD
Trigger Modes	Video, Edge
Connectivity	USB 2.0
Weight	2.0 kg
Input Impedance	1 MΩ
Power Supply	100 to 240 VAC, 45 to 440 Hz