To Next PageTo Next Page
Need help?Do you have a question about the Tektronix TDS3054 and is the answer not in the manual?
General| Bandwidth | 500 MHz |
|---|---|
| Channels | 4 |
| Sample Rate | 5 GS/s |
| Vertical Resolution | 8 bits |
| Input Coupling | AC, DC, GND |
| Trigger Modes | Auto, Normal, Single |
| Display Type | Color LCD |
| Timebase Accuracy | ± 50 ppm |
| Operating Temperature | 0 °C to +50 °C |
| Vertical Sensitivity | 1 mV/div to 10 V/div |
| Input Impedance | 1 MΩ |
| Trigger Types | Edge, Pulse, Video, Logic |
General precautions to avoid injury and product damage during operation.
Precautions for safe operation in various environmental and operational conditions.
Essential safety rules for performing service procedures on the instrument.
Conditions for meeting specs, typical vs. guaranteed values, and input ratings.
Specifications for vertical scale, bandwidth, and horizontal acquisition parameters.
Specs for trigger sensitivity, display characteristics, and I/O ports.
Procedures for performing the self-test and checking DC voltage measurement accuracy.
Procedures for testing bandwidth, trigger sensitivity, and time base accuracy.
Step-by-step guide to perform the factory calibration procedure using the CAL switch.
Required tools and initial steps for troubleshooting instrument failures.
Flowcharts for troubleshooting power-on issues and power distribution problems.
Step-by-step procedures for troubleshooting specific modules like battery, front panel, and main board.
