Need help?Do you have a question about the Tektronix TDS3014C and is the answer not in the manual?
General| Bandwidth | 100 MHz |
|---|---|
| Channels | 4 |
| Display | Color LCD |
| Vertical Resolution | 8 bits |
| Input Coupling | AC, DC, GND |
| Timebase Range | 5 ns/div to 50 s/div |
| FFT | Yes |
| Sample Rate | 1.25 GS/s |
| Maximum Input Voltage | 300 V (DC + peak AC) |
| Timebase Accuracy | 50 ppm |
| Trigger Modes | Normal, Single |
| Trigger Types | Edge, Pulse, Video |
| Connectivity | USB |
| Power Requirements | 100-240 VAC |
| Record Length | 10 Mpoints |
| Input Impedance | 1 MΩ ±2%, 13 pF ±3 pF |
Covers essential safety measures for product operation, including avoiding hazards, proper use, and handling.
Guides users through initial verification, probe compensation, and setting time and date for the oscilloscope.
Explains how to adjust probes to match oscilloscope input channels for accurate measurements.
Demonstrates how to quickly display a signal and measure its frequency and peak-to-peak amplitude.
Details controls for managing waveform acquisition, including Run/Stop, Single Sequence, and Autoset functions.
Explains various trigger types and settings, including Edge, Logic, Pulse, and Video triggering.
Provides detailed electrical specifications for the oscilloscope's input channels, including impedance and voltage ratings.
Lists specifications related to the vertical system, such as scale range, bandwidth, and measurement accuracy.
To Next Page
