Tektronix TDS3014C Service Manual

Service Manual
TDS3000C Series
Digital Phosphor Oscilloscopes
071-2507-00
This document supports firmware version 4.00
and above for TDS3000C Series instruments only.
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

Tektronix TDS3014C Specifications

General

Bandwidth	100 MHz
Channels	4
Display	Color LCD
Vertical Resolution	8 bits
Input Coupling	AC, DC, GND
Timebase Range	5 ns/div to 50 s/div
FFT	Yes
Sample Rate	1.25 GS/s
Maximum Input Voltage	300 V (DC + peak AC)
Timebase Accuracy	50 ppm
Trigger Modes	Normal, Single
Trigger Types	Edge, Pulse, Video
Connectivity	USB
Power Requirements	100-240 VAC
Record Length	10 Mpoints
Input Impedance	1 MΩ ±2%, 13 pF ±3 pF