Tektronix TDS3052 - User Manual

Service Manual
TDS3000 Series
Digital Phosphor Oscilloscopes
071-0382-01
This document supports firmware version 2.00
and above.
Warning
The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

Summary

General Safety Summary

Safety Precautions

Covers precautions to avoid injury and damage, including power, grounding, and handling.

Preventing Electrostatic Discharge (ESD)

Details precautions to prevent damage from static discharge when handling components.

Operating Information

Connecting and Using Power

Probe Compensation and Self Calibration

Outlines procedures for probe compensation and self-calibration to ensure accurate measurements.

Performance Verification

Verification Procedures

Outlines steps for performing self-tests and verifying instrument performance against specifications.

Specific Performance Checks

Adjustment Procedures

Factory Adjustment Procedure Steps

Details step-by-step procedure for performing factory calibration, including switch activation and signal connection.

Maintenance

Removal and Installation Procedures

Troubleshooting

Offers information and procedures to help isolate defective modules and troubleshoot instrument failures.

Tektronix TDS3052 Specifications