Command Descriptions
2−108
TDS200/1000/2000 Series Oscilloscope Programmer Manual
For FFT, the optional <window> argument is HANning, FLATtop, or
RECTangular.
MATH:DEFINE CH1+CH2"
sets the math waveform so that it displays the sum of channel 1 and
channel 2.
MATH:DEFINE FFT (CH1, HANNING)"
sets the math waveform to display an FFT of channel 1 using a
Hanning window.
NOTE . You can use this example with a TDS1000 or TDS2000 series,
as well as a TDS200 series with a TDS2MM measurement module.
MATH:FFT:HORizontal:POSition
NOTE. You can use this command with a TDS1000 or TDS2000
series, as well as a TDS200 series with a TDS2MM measurement
module.
Sets or queries the FFT math waveform horizontal position.
Horizontal
MATH:FFT:HORizontal:POSition <NR3>
MATH:FFT:HORizontal:POSition?
Examples
Group
Syntax
To Next Page
Loading...
