To Next PageTo Next Page
Need help?Do you have a question about the Tektronix TM 502A and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Mainframe Slots | 2 |
| Power Supply | Internal |
| Input Frequency | 50/60 Hz |
| Output Voltage | +5 VDC, ±15 VDC |
| Weight | 2.7 kg (6 lbs) |
Explanation of symbols and terms used in safety summaries.
Detailed description of the TM 502A power module and its capabilities.
Specifies the ambient conditions under which performance is valid.
Procedure for selecting line voltage and replacing fuses.
Instructions for installing the optional handle/tilt stand.
Step-by-step instructions for installing plug-in modules.
Steps to follow for powering on the module after preparation.
Precautions and information regarding static-sensitive components.
Instructions for cleaning the instrument's interior and exterior.
Guidance on how to obtain replacement parts for the instrument.
Procedure for removing the main circuit board.
Procedure for replacing the series pass transistor.
Lists available options for the TM 502A Power Module.
Information on how to order replacement electrical parts.
Cross-reference of manufacturer codes to names and addresses.
Explanation of graphic symbols and class designations used in diagrams.
Explanation of component locator diagrams and their use.
Information on how to order replacement mechanical parts.
Guidance on navigating and using the replaceable parts list.
Explanation of the indentation system used in the parts list.
