Teldat Regesta Smart PRO - Connecting the Router; Power source; Power connector pins

Chapter 4 Connecting the Router
This chapter provides a detailed guide on connecting the Regesta Smart PRO router to Ethernet devices and net-
works. Within this chapter, you will find the following sections:
• Power source on page 20
• Data connections on page 22
• Installing the SIM card on page 27
• RST button on page 29
• Troubleshooting on page 30
• Updating the software on page 31
4.1 Power source
Note
Before connecting the router, we kindly ask you to carefully read and follow the instructions provided
below.
4.1.1 Power connector pins
The power connector is located on the connector panel of the router.
Fig. 8: Power Supply Connector
Depending on the model, the Regesta Smart PRO can be DC or AC-powered.
Note
Please ensure that the power input of your device is compatible with your power supply.
The power connector on this router is a 2-wire 5.08 mm pitch terminal block.
The connector is equipped with 2 terminals for both AC power (in the AC version or AC-powered MR version) and
4 Connecting the Router Teldat S.A.
20 Regesta Smart PRO