EasyManua.ls Logo

Teldat Regesta Smart PRO - Wireless WAN interface; Configuration interface; RS-232 serial interface; RS-485 serial interface

Teldat Regesta Smart PRO
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A.2.6 Wireless WAN interface
WWAN Standard/Bands EC25-E:
LTE:
FDD. B1, B3, B5, B7, B8, B20
TDD: B38, B40, B41
WCDMA: B1, B5, B8
GSM/GPRS/EDGE: 900/1800 MHz
EC25-AU:
LTE:
FDD. B4, B5, B7, B28
WCDMA: B2, B5
GSM/GPRS/EDGE: 850/1900 MHz
Speed (DL/UL)
LTE Cat 4.
FDD. 150Mbps/50Mbps
TDD: 130Mbps/35Mbps
HSPA+ Cat 24/6: 42Mbps/5.76Mbps
UMTS: 384Kbps/384kbps
EDGE: 236Kbps/236Kbps
GPRS: 85.6Kbps/85.6Kbps
CONNECTOR Two RF SMA female connectors. (Optional).
SIM Slots 2 Mini-SIM (2FF) ISO/IEC 7810:2003, ID-000 (1.8V / 3V)
A.2.7 Configuration interface
LOCAL TERMINAL V.24 115200-8-N-1-without flow control.
CONNECTOR RJ-45 female on the connector panel.
A.2.8 RS-232 serial interface
STANDARDS RS-232. Asynchronous serial port with control signals.
SPEED From 300 to 115200 bps.
CONNECTOR RJ-45 female on the connector panel (optional).
A.2.9 RS-485 serial interface
STANDARDS 2-4 wire RS-485/RS-422 configurable via software. Bus termination configurable
via software.
SPEED From 300 to 115200 bps.
CONNECTOR RJ-45 female on the connector panel (optional).
A.2.10 Power supply specifications
Technical Information Teldat S.A.
40 Regesta Smart PRO

Table of Contents