Teleco TVRGBDU868ST30 - User Manual

IT - RICEVITORE RADIO PER IL CONTROLLO DI STRIP LED RGB ANODO COMUNE
EN  RADIO RECEIVER CONTROLLING RGB LED STRIPS COMMON ANODE
FR - RECEPTEUR RADIO POUR LE CONTROLE DES LEDS RGB AVEC ANODE COMMUNE
DE  EMPFÄNGER ZUR ANSTEUERUNG VON RGB LED STRIPES  GEMEINSAME ANODE
IT - Attenzione: l’alimentazione fornita al ricevitore deve corrispondere al voltaggio del carico!
EN - Attention: the power supply connected to the receiver must correspond to the voltage of the load!
FR - Attention: l’alimentation fournie au récepteur doit correspondre à la tension de la charge!
DE - Achtung: Die Stromversorgung des Empfängers muss mit der Spannung der Last übereinstimmen!
IT - Ingressi lari
EN - Wired input
FR - Entrées laires
DE - Verdrahtete Eingänge
IT - MONTAGGIO EN  MOUNTING FR - FIXATION DE  MONTAGE
IT - Codice prodotto
EN - Product code
FR - Code du produit
DE - Artikelnummer
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights
DOC.: T775.02
TVRGBDUXXXST30
DATE: 25/06/18
TVRGBDU868ST30 Master 3x4A (868.3Mhz)
TVRGBDU916ST30 Master 3x4A (916Mhz)
TVRGBDU868BST30 Master 3x4A, Box IP54 (868.3Mhz)
TVRGBDU916BST30 Master 3x4A, Box IP54 (916Mhz)
165 mm
IT - Foro per il fissaggio con vite (sotto lo sportello)
EN - Hole for fixing with screw (under the cover)
FR - Trou pour fixation avec vis (sous le couvercle)
DE - Loch für die Montage mit Schraube (unter dem Deckel)
IT - Montaggio su superficie piana
EN - Flat surface mounting
FR - Fixation sur surface plate
DE - Montage auf ebene Oberfläche
70 mm
185 mm
IT - Foro per il fissaggio con vite (sotto lo sportello)
EN - Hole for fixing with screw (under the cover)
FR - Trou pour fixation avec vis (sous le couvercle)
DE - Loch für die Montage mit Schraube (unter dem Deckel)
IT - Montaggio su superficie piana
EN - Flat surface mounting
FR - Fixation sur surface plate
DE - Montage auf ebene Oberfläche
74 mm (50 mm)
56 mm
151 mm
47 mm
40 mm
T1T2T3
Led 1
P1
P2
P3
Led 2
Led 3
Led 4
9
10
11
12
13
14
12-24V
IN
12-24V
OUT
COM
SLAVE OUT
(max. 5 slaves)
1
2
3
4
5
6
7
8
COM
B -
G -
R -
TVRGBD000ST24
TVRGBD000BST24
Slave 3x4A
TELECO AUTOMATION SRL
Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com

Summary

RGB Touch Transmitter Functions

Memorizing the RGB Touch Transmitter

Learn the RGB touch transmitter for controlling scenes.

Colour Selection and Control

Colour Selection

Select colours using the touch disk.

Turn Off Command

Turn off the load using the touch disk.

Colour Intensity Adjustment

Adjust the light intensity of selected colours.

Cold;Warm White Colour Selection

Select cold or warm white colour.

Setting Cold;Warm White Colour

Set the cold/warm white colour.

Memorizing Touch Transmitter Buttons

Memorize transmitter buttons for scene control.

7-Channel Transmitter Operations

Remote Radio Code Management

Memorizing Radio Codes

Memorize or modify preset colours and transmitter buttons.

Modifying Preset Colours

Modify the colour settings of the preset.

Single Command Channel Memorization

Memorizing Single Command Channels

Memorize specific functions like colour selection, ON/OFF, white colours.

Radio Code Deletion Procedures

Single Radio Code Deletion

Delete a single radio code from the receiver.

All Radio Codes Deletion

Delete all radio codes from the receiver.

Preset Light Intensity Memory

Manage light intensity memory for preset colours.

Remote Code Management

Remote Memorization of Radio Codes

Memorize additional radio codes remotely.

Remote Radio Code Deletion

Remote Deletion of Radio Codes

Delete radio codes remotely using the transmitter.

Scene Creation and Management

PC Software Scene Creation

Create RGB lighting scenes using PC software.

Scene Transmission

Send created scenes to compatible receivers.

Scene Usage

Utilize scenes by memorizing transmitters for control.

FreeLED Functions with P1

Memorizing Transmitter for Freeled Scenes

Memorize a transmitter to command Freeled scenes.

Memorizing USB Transmitter Button

Memorize a specific button of the USB transmitter.

Deleting USB Transmitter Button

Delete a specific button of the USB transmitter.

Deleting All USB Transmitters

Delete all USB transmitters.

Technical Specifications

Warnings and Compliance

Electrical Connection Warnings

Proper connection of power supply and LEDs, polarity.

Product Enclosure and Ventilation

Avoid insulating materials and ensure ventilation.

Radio Equipment Compliance

Declaration of conformity for radio equipment directive.

Teleco TVRGBDU868ST30 Specifications