To Next PageTo Next Page
Need help?Do you have a question about the Teleco TVPLT868C80T0 and is the answer not in the manual?
Technical Specifications of the Control Unit| reception frequency | 868.3 MHz, 916 MHz |
|---|---|
| power supply | 230Vac |
| max power of the motor | 350W |
| default working time | 90 sec |
| power of transformer | 80W - 24Vdc |
| maximum power of LED output | 70W - 24Vdc |
| operating temperature range | -20° - +45°C |
| rain sensor power supply | 12 Vdc max. 100mA |
| max number of transmitters | 16 |
Technical Specifications of the Box| protection | IP54 |
|---|---|
| material of the box and its cover | Thermoplastic ABS |
| colour of the box and its cover | Grey RAL 7035 |
| cable glands | M16 (POLIAMMIDE 6.6) |
| sealing ring of cable glands | NEOPRENE® |
| self-extinguishing class | V2 (UL-94) |
Lists product codes (e.g., TVPLT868C80T0) and key characteristics like 80W transformer and 230Vac motor control.
Crucial safety note requiring qualified technicians for 230Vac installations and adherence to automatic cover rules.
Covers electrical safety, insulation, earth wiring, use of qualified personnel, and compliance with directives like RAEE and RoHS.
Illustrates physical connections and lists signal pin assignments (1-20) for motor, power, and receiver components.
Explains how to configure the unit for either pergola or awning operation using the DIP4 switch setting.
Guides on memorizing a single transmitter channel for OPEN-STOP-CLOSE functions on the motor.
Details memorizing a transmitter pair for automatic command and motor safety during directional changes.
Explains memorizing a 7-channel transmitter for precise pergola slat angle control, noting the need for working time setup.
Describes how to program a single transmitter channel for ON/OFF and dimming functions of LED lights.
Covers memorizing a 7-channel transmitter for individual control of LED channels and operations.
Provides instructions on how to modify or create custom light scenes using specific transmitter buttons (CH5, CH6, CH7).
Outlines the procedure for removing a single transmitter's code from the system's memory.
Details the process to erase all previously memorized transmitters from the receiver unit.
Explains how to program a new transmitter to work with the system by copying an existing one.
Describes the method for deleting a specific radio code using an already programmed transmitter.
Guides on configuring the automatic working time for pergola applications using DIP3 and P1 buttons.
Explains wind sensor operation, priority, and the automatic response for awning closure or pergola slat adjustment.
Details rain sensor activation, pergola slat closure, awning retraction, and alarm deactivation conditions.
Lists technical details like reception frequency, power supply, motor power, transformer specs, and temperature range.
Provides details on the box's protection rating (IP54), material, color, cable glands, and self-extinguishing class.
