To Next PageTo Next Page
Need help?Do you have a question about the Teleco TVRCL868A02 and is the answer not in the manual?
Press SET and hold until IMP LED turns ON. Release and wait for LED to turn off.
Press SET twice and hold until ON-OFF LED turns ON. Release and wait for LED to turn off.
Configure seconds, minutes, and hours for timed relay operation up to 9 hours.
Memorize a single channel transmitter by pressing MEM and then the transmitter button.
Memorize a double channel transmitter for ON/OFF function using MEM button.
Copy a transmitter's function to a new transmitter by pressing P3 and then specific buttons.
Delete a specific channel transmitter using the DEL button.
Clear all stored transmitters from memory by pressing DEL twice for 10 seconds.
Delete a specific channel transmitter by pressing P3 three times and then transmitter button.
Installation must be by licensed professionals to prevent fire, shock, or injury.
Mount vertically in a ventilated area, avoiding flammable materials and hermetic closure.
Use 230Vac supply with Earth, proper cable section, and temperature rating up to 90°C.
Avoid use by persons with reduced capabilities. Supervise children. Do not touch with wet hands.
Dispose of WEEE separately. Contact local authority for sorting systems. Retailer must collect old equipment.
Press SET and hold until IMP LED turns ON. Release and wait for LED to turn off.
Press SET twice and hold until ON-OFF LED turns ON. Release and wait for LED to turn off.
Configure seconds, minutes, and hours for timed relay operation up to 9 hours.
Memorize a single channel transmitter by pressing MEM and then the transmitter button.
Memorize a double channel transmitter for ON/OFF function using MEM button.
Copy a transmitter's function to a new transmitter by pressing P3 and then specific buttons.
Delete a specific channel transmitter using the DEL button.
Clear all stored transmitters from memory by pressing DEL twice for 10 seconds.
Delete a specific channel transmitter by pressing P3 three times and then transmitter button.
Installation must be by licensed professionals to prevent fire, shock, or injury.
Mount vertically in a ventilated area, avoiding flammable materials and hermetic closure.
Use 230Vac supply with Earth, proper cable section, and temperature rating up to 90°C.
Avoid use by persons with reduced capabilities. Supervise children. Do not touch with wet hands.
Dispose of WEEE separately. Contact local authority for sorting systems. Retailer must collect old equipment.
General
