Teleco Master TVRCD868A04N - User Manual

ON, Ein, Aan
OFF, Aus, Uit
TELECO AUTOMATION SRL - Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY
TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com
This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights
Master TVRCD868A04N (868.3Mhz) TVRCD916A04N (916Mhz)
Slave TVRCD868M04 (868.3Mhz) TVRCD916M04 (916Mhz)
IT - RICEVITORE WIRELESS 230Vac CON 4 USCITE RELÈ (contatto libero da potenziale) per
collegare carichi no a 3000W (resistivi) per uscita. Ideale per applicazioni su guida DIN.
EN - WIRELESS 230Vac RECEIVER WITH 4 RELAY OUTPUTS (potential free contact) for the
connection of loads up to 3000W (resistive) each output. It is ideal for DIN rail.
FR - RÉCEPTEUR SANS FIL 230Vac AVEC 4 SORTIES RELAIS (contact libre de potentiel) pour
connecter des charges jusqu’à 3000W (résistives) par sortie. Idéal pour les installations en rail DIN.
DE - DRAHTLOSER 230Vac EMPFÄNGER MIT 4 RELAISAUSGÄNGEN (potentialfreier Kontakt).
Schalten von Lasten bis zu jeweils 3000W (Widerstandsbelastung). Montage auf Hutschiene.
NL - DRAADLOZE ONTVANGER 230Vac MET 4 RELAISUITGANGEN (Potentiaalvrij contact), voor
de aansluiting van belastingen tot 3000W (weerstandsbelasting). Montage op DIN-rail.
IT - Codice prodotto EN - Product code FR - Code du produit DE - Artikelnummer NL - Artikelnummer
DOC.: T109.03
TVRCDxxxA04N-M04
DATE: 06/08/15
IT - Collegamenti EN - Wirings FR - Connexions DE - Anschlüsse NL - Aansluitingen
DIP1 ► L1 DIP2 ► L2 DIP3 ► L3 DIP4 ► L4
ON, Ein, Aan / IMPULS. ►
OFF, Aus, Uit / IMPULS. ►
ON/OFF, Ein/Aus, Aan/Uit
IMPULS.
DIP5
ON, Ein, Aan Impulsivo (180ms); Impulsive (180ms); Impulsive (180ms); Impulsiv (180ms); Impuls (180ms)
OFF, Aus, Uit ON/OFF Ein/Aus Aan/Uit
1 2 3 4
5 6 7 8
9 10
11 12
1 2 3 4
5 6 7 8
9 10
1
2
3
4
DEL MEM
ON
MEM
TOT
5
1
2
3
4
DEL MEM
ON
5
OUT OUT IN
MEM
TOT
230Vac IN
L N
Antenna
Aerial
Antenne
L1 L2 L3 L4
IT - Tasti di programmazione
EN - Programming buttons
FR - Boutons de programmation
DE - Programmierungstasten
NL - Programmeringsknoppen
DIP
IT - Tasti di programmazione
EN - Programming buttons
FR - Boutons de programmation
DE - Programmierungstasten
NL - Programmeringsknoppen
DIP
(Max. 5)
MASTER SLAVE
...
230Vac IN
L N
L1 L2 L3 L4
IT - Comandi con tasto singolo
EN - Single button commands
FR - Commandes avec bouton singulier
DE - Einzel Befehle
NL - Enkel knop sturing
►
IT - Comandi con doppio tasto (coppia)
EN - Double button commands
FR - Commandes avec boutons en couple
DE - Paarweise Befehle
NL - Dubbele knop sturing

Teleco Master TVRCD868A04N Specifications

General

Ethernet	No
Supported Resolution	Up to 1080p
Video Decoding	MPEG2, MPEG4
Audio Decoding	Dolby Digital
Video Output	HDMI
USB Port	USB 2.0

Summary

TELECO Wireless Receiver: Overview and Identification

Product Model Identification

Lists Master and Slave receiver models (TVRCD868, TVRCD916) and their frequencies.

Wiring and Connection Guide

Illustrates unit connections and DIP switch functions for configuration.

Radio Code Memorization Procedures

Memorizing Individual Output Codes

Steps for memorizing radio transmitter codes for single outputs.

Memorizing All Output Codes

Procedure to memorize radio codes for all outputs simultaneously.

Radio Code Deletion Procedures

Deleting a Single Radio Code

Instructions for removing one specific radio code from memory.

Deleting All Radio Codes

Steps to erase all stored radio codes from the receiver.

Remote Radio Code Management

Remote Code Memorization

Adding new radio codes remotely using the transmitter's P3 button.

Remote Code Deletion

Removing radio codes remotely via the transmitter's P3 button.

Product Installation, Safety, and Disposal

Installation and Mounting

Guidelines for installing the product, mounting location, and electrical connections.

Safety Warnings and Precautions

Important safety instructions and warnings for product use.

Product Disposal Instructions

Proper procedures for disposing of the product at the end of its life.

TELECO Receiver Technical Specifications

Power Supply and Output Ratings

Details power supply voltage, max output power, and current for each channel.

Operating Environment and Protection

Specifies operating temperature range, protection rating (IP20), and reception frequency.

Memory Capacity and Device Dimensions

Information on radio memory capacity and the physical dimensions of the receiver.