18 Operations
The components of the LCD display when playing USB drive or SD/MMC card audio are as
follows:
1. USB drive or SD/MMC card audio source indicator
2. Current track number (top) and total number of tracks (bottom)
3. Equalizer mode
4. Repeat mode
5. Play/pause state
6. Mute/unmute state
7. Current track location and current track duration
8. Audio file name
To switch between a connected USB drive and an inserted SD/MMC card being the audio source:
1. Press U/SD on the remote.
To play or pause audio:
1. Press Play/Pause on the front of the TMS-MA or the remote.
To mute the audio:
1. Press Mute on the remote.
To select a different audio file:
1. Press Left or Right on the front of the TMS-MA or the remote.
Note: The audio files will be listed in alphabetical order according to their file names.
2. Alternatively, enter the number of the audio file followed by Play/Pause on the remote to
select that audio file, e.g., press 5 and the Play/Pause to play the fifth audio file.
To rewind or fast forward through an audio file:
1. Press and hold Left or Right on the front of the TMS-MA or the remote. Release when
the desired position in the audio file has been reached.
To adjust the volume:
1. Press Vol- or Vol+ on the remote.
To Next Page
Loading...