Telecor TMS-MA - D.1.4 Playing Aux Audio; D.1.5 Playing Radio Audio

20 Operations
D.1.4 Playing Aux Audio
To play audio from AUX input:
1. Plug the AUX input device into the AUX IN port on the front of the TMS-MA.
2. If the AUX input device is not automatically detected and played, press and hold MENU
on the front of the TMS-MA or Mode on the remote until the main menu appears.
3. Press MENU on the front of the TMS-MA or Mode on the remote until “AUX” is
selected.
4. Press Play/Pause on the front of the TMS-MA or the remote.
Selecting AUX Input Audio
When the TMS-MA is set to play audio from AUX input, the LCD display on the front of the
TMS-MA will display the following:
TMS-MA Playing AUX Input Audio
To play or pause audio:
1. Press Play/Pause on the front of the TMS-MA or the remote.
D.1.5 Playing Radio Audio
To play audio from radio:
1. Press and hold MENU on the front of the TMS-MA or Mode on the remote until the
main menu appears.
2. Press MENU on the front of the TMS-MA or Mode on the remote until “Radio” is
selected.
3. Press Play/Pause on the front of the TMS-MA or the remote.
Selecting AUX Input Audio