◎ The remedies provided herein are the buyer’s sole and exclusive
remedies. TELECRANE shall not be liable for any direct, indirect,
special, incidental or consequential damages.
2
Chapter 2. Attention & Precaution
Attention
◎ Never dismantle the equipment by any unauthorized personnel, or it
may be damaged.
◎ After finishing operation of TELECRANE shut off main power to the
crane, power to receiver, and remove transmitter key. If the
transmitter’s power is controlled by a rotary key switch, turn the key to
“OFF” position first, then remove it.
◎ The crane should be equipped with main power relay, limit switch and
other safety devices.
Precaution
A. To avoid any interference, the Receiver must be away from motors,
frequency converter and power cable as far as possible.
B. The Receiver should be installed on the top of the electrical control
box. Don’t mount the receiver inside the electrical control box.
C. There are 4.3 billion ID Codes for each complete unit with an
unique one prior to shipment. To avoid any interference, please
manage the remote controls with the different ID Codes at a
working site when installing.
D. It is not allowed to use the same series models with the same
frequency in the range of 200 meters.
Procedures of emergency
To Next Page
Loading...
Need help?
General
