A-2
Appendix Models 2000A-EU
Teledyne Analytical Instruments
System Power
Requirements: 110 VAC, 50-60Hz
Dimensions: 7.5”H x 10.8 “w X 13.7”D
Cell Material: Nickel plated brass block with nickel alloy
filaments and stainless steel plates
O/P Interface: Full duplex RS-232, implement a subset of
Tracs Command
Mounting:
Standard: General purpose flush panel mounting
Options: General purpose rack mounted to contain
either one or two in a 19” rack mountable
plate
Relative Humidity: Up to 99%
Altitude: 1,609 m
* Other configurations, including a totally
explosion-proof, are available
To Next Page
Loading...
