Need help?Do you have a question about the Teledyne 2243800-464 and is the answer not in the manual?
General| Brand | Teledyne |
|---|---|
| Model | 2243800-464 |
| Category | Measuring Instruments |
| Language | English |
Provides an overview of the Teledyne Controls Wireless GroundLink Quick Access Recorder (WQAR).
Outlines the functions of the WQAR, using OPS software, and lists hardware variants.
Explains how the WQAR records and transmits flight data wirelessly via cellular networks.
Details the WQAR's capabilities, including aircraft signaling, ACMS reporting, RF interlocks, and mobile network usage.
Describes the WQAR's initialization sequence, including FAIL light behavior and system status display.
Explains how the WQAR records ARINC 717 data and compresses it for transmission during flight.
Details transmission after landing, including RF interlocks, Recording Completion Delay (RCD), and data transfer.
Explains the software components (OPS and OPC) and their associated part numbers within the WQAR family.
Describes the numbering convention for WQAR software part numbers, typically a 6-digit number starting with 7.
Covers WQAR configuration settings for aircraft and cellular environments, including front panel operations and software upgrades.
Describes the WQAR's front panel interface for operator status checks, diagnostics, and maintenance activities.
Explains the two-line, 16-character display showing operational status, including normal and out-of-sync data conditions.
Details the amber FAIL indicator, which illuminates for hardware faults, missing configuration, or full data card.
Describes the function of the MODE, SEL, +, and – buttons on the WQAR's front panel for navigation and control.
Explains the access door, its contents (RSM, CF card, ports), and how to open it for maintenance procedures.
Describes the WQAR's antennas, their connection, and security, with information on replacement parts.
Explains the WQAR's system clock, its super-capacitor power source, and how it is set and updated.
Covers accessing and navigating WQAR menus via front panel buttons, including SYSTEM STATE and UNIT INFO.
Details current hardware status displays, including ACQUISITION, DISCRETES, WIRELESS, ETHERNET STATUS, CAPACITY, and FILE INFO.
Explains various diagnostic tests like DISPLAY TEST, ACQ SIMULATION, RF INTERLCK TEST, and DISCRETE TESTS.
Allows transmission of test files to the base station using cellular radios for verification purposes.
Designated for Teledyne Controls Engineering use only for specific testing scenarios.
Initiates a reboot and performs an ARINC 717 test, displaying results post-reboot.
Allows the operator to temporarily disable radios, affecting diagnostic tests and persisting through power cycles.
Re-enables radios previously disabled via the 'Disable Radios' option, requiring a reboot.
Intended for Teledyne Controls Engineering personnel for initial unit self-testing.
To Next Page
