Teledyne 3110 User Manual

Teledyne Analytical Instruments
OPERATING INSTRUCTIONS FOR
Model 3110
Portable Trace Oxygen Analyzer
DANGER
Toxic gases and or flammable liquids may be present in this monitoring system.
Personal protective equipment may be required when servicing this instrument.
Hazardous voltages exist on certain components internally which may persist
for a time even after the power is turned off and disconnected.
Only authorized personnel should conduct maintenance and/or servicing.
Before conducting any maintenance or servicing, consult with authorized
supervisor/manager.
Copyright © 2005 Teledyne Analytical Instruments
P/N M77970
10/16/2005
ECO:

Teledyne 3110 Specifications

General

Brand	Teledyne
Model	3110
Category	Analytical Instruments
Language	English

Summary

Introduction to the Model 3110 Portable Oxygen Analyzer

1.1 Introduction

1.2 Features

Details on standard features like Data Logger, Display, and User Interface.

1.3 Method of Analysis

Explanation of how the instrument measures oxygen using a micro-fuel cell.

1.4 Micro-Fuel Cell

Information about the micro-fuel cell technology and its characteristics.

1.5 Accuracy and Response

Specifies the instrument's accuracy and response time characteristics.

Installation Guide for Model 3110

2.1 Charging the Batteries

Instructions for charging the instrument's rechargeable batteries.

2.2 Gas Connections

Guidelines for connecting sample and calibration gas lines.

2.3 Sensor Installation

Procedure for installing the trace oxygen sensor.

2.4 Calibration

Steps involved in calibrating the Model 3110 analyzer.

2.5 Set the Sample Flow rate

How to set the appropriate sample gas flow rate.

Operation of the Model 3110 Analyzer

3.1 Front Panel Interface

Overview of the keys and controls on the instrument's front panel.

3.1.1 ENTER Key

3.2 Operation and Setup Screens and Menus

Overview of the instrument's menu structure and navigation.

3.2.5 STANDARD ALARM Screen

3.2.6 ALARM Enable

3.2.10 RANGE 1 Screen

3.2.11 RANGE 2 Screen

3.2.12 Range Screen

3.2.13 SPAN VALUE Screen

Inputting the known concentration of the span gas.

3.2.14 SPAN Screen

Initiating the span calibration process.

3.2.15 Filter Screen

Maintenance & Troubleshooting for Model 3110

4.1 Routine Maintenance

4.3 Replacing the Battery

4.4 Battery Power Supply Service

4.5 Cell Replacement

Instructions for replacing the micro-fuel cell sensor.

4.8 Leak Testing