To Next PageTo Next Page
Need help?Do you have a question about the Teledyne 311 and is the answer not in the manual?
General| Brand | Teledyne |
|---|---|
| Model | 311 |
| Category | Analytical Instruments |
| Language | English |
Flush contact area with cold water for several minutes, seek medical attention.
Flush with cold water for at least 15 minutes, seek immediate medical attention.
Drink milk or milk of magnesia, seek immediate medical attention.
Move to fresh air, use artificial respiration or oxygen if needed, seek medical attention.
Overview of the Model 311 trace oxygen analyzer, its purpose and portability.
Details the electrochemical fuel cell principle used for oxygen measurement.
Sealed, disposable transducer with no electrolyte to change or electrodes to clean.
Allows calibration using atmospheric air, the most economical standard.
Internal rechargeable NiCad batteries provide up to 35 days of operation per charge.
Specifications for measurement accuracy and gas response times.
Describes the instrument's durable aluminum case and carrying features.
Guidance on selecting and using sampling equipment for accurate measurements.
Information on power requirements for battery recharging.
Initial setup and readiness of the Model 311 for immediate use.
Discusses calibration frequency and prerequisites for accurate readings.
Step-by-step guide for calibrating the analyzer using ambient air.
Optional calibration method using a known concentration span gas.
Correct procedure for connecting to positive pressure sample sources.
Techniques for sampling gases at atmospheric or negative pressure using a pump.
Instructions for proper battery recharging and safety precautions.
Minimal routine maintenance required beyond battery charging.
Detailed steps for replacing the Micro-Fuel Cell and troubleshooting calibration issues.
Information on the warranty period, storage, and handling of the cell.
