To Next PageTo Next Page
Need help?Do you have a question about the Teledyne 3000PA and is the answer not in the manual?
General| Brand | Teledyne |
|---|---|
| Model | 3000PA |
| Category | Analytical Instruments |
| Language | English |
General introduction to the Teledyne Analytical Instruments Model 3000PA Percent Oxygen Analyzer.
Lists common applications for the Model 3000PA analyzer.
Highlights key features of the Model 3000PA analyzer.
Details different model designations for the 3000PA analyzer.
Describes the front panel controls and displays of the Model 3000PA.
Explains how to differentiate between LCD and VFD display technologies.
Details the rear panel connectors and interface for the Model 3000PA.
Introduces the three subsystems of the oxygen analyzer.
Explains the principles and operation of the Micro-Fuel Cell sensor.
Discusses the fundamental principles of how the Micro-Fuel Cell works.
Describes the physical construction and components of a Micro-Fuel Cell.
Details the specific electrochemical reactions occurring within the Micro-Fuel Cell.
Explains how pressure variations affect the analyzer's readings.
Describes the linear calibration characteristics of the Micro-Fuel Cell.
Outlines different classes of Micro-Fuel Cells and their applications.
Explains the function and design of the analyzer's sample system.
Describes the electronic components and signal processing within the analyzer.
Instructions for unpacking the analyzer and checking for damage.
Guidance on mounting the Model 3000PA analyzer.
Details the connections and ports on the rear panel of the analyzer.
Instructions for making gas connections to the analyzer, including restrictor usage.
Provides guidance on making safe electrical connections to the analyzer.
Details the connection for the primary AC power input.
Instructions for installing the appropriate fuse for the analyzer.
Describes the analog output terminals and their functions.
Details the connections for the three alarm relay circuits.
Explains the inputs for remote control of calibration.
Details the RS-232 serial port for digital communication.
Describes the connector used for controlling external valves.
Overview of configuring the analyzer after installation.
Explains how to use the analyzer's buttons and navigate functions.
Details the subfunctions available within the System menu.
Instructions for adjusting display settings and troubleshooting readability.
Guide to configuring and initiating automatic calibration cycles.
Explains how to set up and manage password security for the analyzer.
Describes the procedure for logging out of password-protected mode.
Explains how to run the analyzer's self-diagnostic test.
Describes how to access and view the instrument's version information.
Details the process of span calibrating the analyzer.
Discusses symptoms and troubleshooting for a failing sensor cell.
Details how to configure the concentration and system failure alarms.
Explains how to set up concentration ranges for analog outputs.
Describes returning to the normal sample analysis mode.
Explains the analog and digital signal outputs of the analyzer.
Outlines routine maintenance tasks for the analyzer.
Details the process for replacing the Micro-Fuel Cell.
Instructions for replacing fuses in the analyzer.
Details how to perform the system self-diagnostic test.
Identifies the main internal electronic and mechanical components.
Provides instructions for cleaning the analyzer's exterior surfaces.
Offers solutions for common erratic readings and zeroing issues.
Lists comprehensive technical specifications for the Model 3000PA analyzer.
Provides a list of recommended spare parts for a two-year period.
Lists relevant engineering drawings for the Model 3000PA.
Details the specifications for the optional 19-inch rack mounting panel.
Provides guidance on restrictors, pressures, and flow rate recommendations.
Explains the procedures for performing zero calibration on the analyzer.
