MB1
User Manual
Page 2 of 37
07/16/13
Revision History
© ODOM HYDROGRAPHIC SYSTEMS, INC. 2013
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be
accurate and reliable and may be subject to change without notice. The publisher will not accept any liability
for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or
other industrial or intellectual property rights.
Version Date Author Remarks
0.1 17 May 12 M Redmayne
1.0 18 May 12 M Redmayne
1.1 21 May 12 M Redmayne 1. Addition of technical drawings
2. Addition of other mounting methods
3. Revision of RTA drawing
1.2 31 May 12 M Redmayne 1. Addition of Part numbers
2. Addition of NMEA GPS format
descriptions
3. Addition of various photographs
4. Minor edits
1.3 5 Jul 12 M Redmayne Addition of PPS input jumper change
procedure
1.4 6 Jul 12 M Redmayne Addition of warning on use of Digibar V
1.5 28 Aug 12 M Redmayne Change in number of beams and depth of
sounding.
1.6 13 Sep 12 M Redmayne Addition of wiring diagram for TSS motion
sensors
1.7 30 Apr 13 M Redmayne Addition of Dipswitch procedure for changing
internal/external sensor input
1.8 30 Aug 13 M Redmayne 1. Addition of configuration setup matrix
2. Addition of offsets for Internal Motion
Sensor
3. Addition of Fairing installation procedure
4. Addition of GPS Antenna Specifications
1.9 14 Sep 13 J Hoffmann Addition of warning with respect to heat
disipation
To Next Page
Loading...
