EasyManua.ls Logo

Telefire ADR-3000 - Specification

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Telefire
ADR-3000 – System Introduction
Revision 1.10 4 November 2004
6 Specification
Width: ........................................................... 465 mm
Height: .......................................................... 350 mm
Depth (Including door): ................................. 98 mm
Weight
(basic configuration – without batteries) .... 7,290 gr.
Operating Temperature Range:.................... -10°C – +60°C (14°F – 140°F)
Relative Humidity Range: ............................. 10% – 93%, non-condensing
Operating Voltage (mains input)................... 230 VAC +10% / -15%
Operating Current
(Quiescent mode, basic configuration): ........ 70 mA
24 V
DC
Maximum output............................... 3½ A continuous
4 A in alarm
Battery capacity ............................................ The ADR-3000’s power supply module can
charge batteries in capacity of up to 12AH.
The battery enclosure can contain two 12 V
sealed lead-acid batteries, up to 20 (W) by 7
(D) by 12 (H) cm each.
For fire alarm control panels requiring
batteries that will not fit in the ADR-3000
chassis use the BC-3000 external battery
enclosure. This enclosure can contain two
12V sealed lead-acid batteries, up to 20 (W)
by 10 (D) by 15 (H) cm each.
If the system requires battery capacity
larger than 12 AH add the TPS-34A Remote
Power Supply with its own batteries. Please
refer to the TPS-34A manual for additional
details about the TPS-34A remote power
supply.
Event memory .............................................. 500 events total:
250 trouble events
250 Alarm events
Specifications are subject to change without prior notice.
– Page 23 –

Table of Contents