TX Bluetooth 74
Record and play memos
Memos are your own recorded messages used as reminders for yourself or others using the same
answering system. You can record your own memos using a system handset. Playback and delete
them in the same way as incoming messages.
To record a memo
1.In standby mode, press MENU/OK then UP/DOWN to select Answering sys.
2.Press MENU/OK then UP/DOWN to select Record memo.
3.Press MENU/OK to start recording after the system announcement and a “beep” sound is
heard.
4.Press KEY2 when you finish recording. The recorded memo plays automatically, and then
handset returns to the previous screen
To play memo
Play memos the same way as messages. See Play messages in the previous paragraph.
B. Announcement
The announcement is the message a caller first hears when the answering machine answers their
call. There are two pre-recorded announcement messages to choose from or you can record your
own.
Record your own announcement
1. In standby mode, press MENU/OK and then UP/DOWN to select Answering sys.
2.Press MENU/OK and then UP/DOWN to select Announcement.
3. Press MENU/OK then UP/DOWN to select Record.
4. Press MENU/OK then UP/DOWN to select Answer & Record or Answer Only.
5. Press MENU/OK to record your announcement message.
6. Press KEY 2 to save your recorded message and play automatically.
Play your announcement
1. In standby mode, MENU/OK then UP/DOWN to select Answering sys.
2. Press MENU/OK and then UP/DOWN to select Announcement.
3. Press MENU/OK then UP/DOWN to select Play.
4. Press MENU/OK then UP/DOWN to select Answer & Record or Answer Only
5. Press MENU/OK. The recorded announcement message is playing.
C. Answer machine settings
Set the answer mode
You can set answer mode to choose which outgoing message you want played to callers.
Answer and Record --The pre-set Answer & Record outgoing message, which allows your caller
to leave a message,
Answer Only--The pre-set Answer Only outgoing message, where callers hear an announcement
but cannot leave a message,
1. In standby mode, press MENU/OK and then UP/DOWN to select Answering sys.
2. Press MENU/OK then UP/DOWN to select Ans sys setup.
3. Press MENU/OK then UP/DOWN to select Answer mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
