Telefunken TX 101 - 3-Way Conference Home or Mobile Call

TX Bluetooth 78
1. Press MENU/OK then UP/DOWN to select Intercom.
2. Press MENU/OK. If you have only one other handset, it will ring. If you have extra
handsets, your handset displays Intercom to: and a list of registered handsets. Press
UP/DOWN to select the
handset you want to call. Press MENU/OK to call your selected handset.
3. Press HOME on the called handset.
4. Press C on the calling handset to transfer external call to called handset. OR press
MENU/OK
then UP/DOWN on the calling handset to select Transfer. Press MENU/OK to transfer.
B. 3-Way conference home or mobile call
You can hold a 3-way conference home or mobile call between 2 internal callers and 1 external
caller.
No subscription is required.
1. Follow steps 1 to 3 in section Transfer a home call
2. Press MENU/OK then UP/DOWN on the calling handset to select Share call.
3. Press MENU/OK to setup conference call.
Conference home and mobile calls
When you have calls established on the home and mobile lines, you can create a 3-way
conference.
To conference both home and mobile calls:
1. Press MENU/OK.
2. Press UP/DOWN to select Conf. home/Conf. mobile (whichever is applicable).
3. Press MENU/OK.
To select an option while on a conference call:
1. Press MENU/OK.
2. Press UP/DOWN to select one of the following options:
- End home call
- End mobile call
3. Press MENU/OK.
To end a conference call:
Press C or put the handset back in the telephone base or charger
Using the home and mobile lines together
- You can be on two different calls using the mobile line and home line at the same time using
two handsets.
- You cannot be on a call using the mobile line and a Bluetooth headset via the home line at the
same time. These are both Bluetooth devices and only one can be used at a time.
- If you are on a call using the mobile line, you cannot join the call using your paired mobile
phone. However, you can join the call using another 9850BT handset. Your mobile phone is
being used for the phone call so only features that are normally available during a call can be
used.